ERR_OFF_2014
You are receiving Product ID and SKU ID errors. Update both Product ID and SKU and you should do this in 2 stages.
1-First update “Walmart-productidupdate” custom field and fill as “yes”Product ID as yes and “Walmart-skuupdate” custom field will be none. Then;
2-“Walmart-skuupdate” custom field update will be yes, “Walmart-productidupdate” update will be none.
Solution:
The update has to be sent to Walmart in two phases.
- First you should export both “Walmart-productidupdate” and “Walmart-skuupdate”.
- Fill the headers in Excel as “Yes” for Product ID and “_None_” to SKU or opposite and upload to SA.
FInally, if you now proceed with a full product data update, this issue will be resolved.
___________________________________________________________________
ERR_EXT_DATA_0801001
This error was caused by blank short description data. A short description is required on Walmart.
Solution:
Enter a short description for your item and update its product data.
___________________________________________________________________
ERR_INT_DATA_01091704
There is a glitch. This is a systematic process error.
Solution:
Send a full product update to the channel.
ERR_INT_DATA_0101564
This is a systematic process error.
Solution:
Send a full product update to the channel.
___________________________________________________________________
ERR_EXT_DATA_0101211
This product is created with a different Product ID on Walmart.
Solution:
Export “Walmart-productidupdate” custom field and fill as “yes”. It will be enough to send only Product ID update.
Product ID update “Yes”, “Walmart-skuupdate” custom field needs to be filled “none”. Then, upload it to StoreAutomator and use the force product data update and Sync the channel.
Please refer to the link below for further information.
___________________________________________________________________
ERR_PDI_0047
This error was caused because you do not have the required number of digits or invalid characters in the UPC field. If your product has UPC, the code must be 12 numbers and no characters or symbols.
Solution:
Make sure that your Product ID is valid and contains numerical values.
___________________________________________________________________
500_INVALID_SYSTEM_STATE
This is a systematic process error.
Solution:
Send a force product data update to all affected items.